Dick Stafford's Rocket Dungeon Blog 
Rocket Dungeon Posts
Sport Rocketry / Tools / 3D Printing
3-D printed Saturn V build notes, part 1 (2016-07-19)
I started by dry fitting all the parts. The fit of all the ABS-on-ABS joints is a bit rough due to the surface finish but are not too snug. I may sand the nose cone shoulder to make it smoother. The ... [Read More]
3-D printed Saturn V build notes, part 2 (2016-07-19)This is the "well, crap, that ain't supposed to happen" edition. I proceeded to dry stack the parts, put in a motor, and fill the nose section with 0.8 ounces of lead. I checked the CG ... [Read More]
3-D printed Saturn V build notes, part 3 (2016-07-20)Well, it is all together but still naked: The final weight went up as I didn't account for the epoxy in the nose, the shock tether, or the screw that holds the motor retainer/launch lug. I'm not used ... [Read More]
3-D printed Saturn V build notes, part 4 (2016-07-26)I decided to at least partially finish the Saturn V. Scale buffs and skilled painters need not comment. I started by outlining the black areas with a Sharpie (hat tip to David 'Daddyisabar' Bauer). I ... [Read More]
Sponsored Ads
