Photo Album - Photos for the Tip "Adding Altimeter Payload for Low Power Rockets"

These pictures are intended to illustrate the Tip that describes my method of adding an Electronics/Altimeter Bay to low-powered rockets.  This article is geared specifically for the Jolly Logic Altimeter One/Two, which is small enough to fit into a BT-20 body tube and light enough to be hoisted by a 1/2A motor or even T-motors (13mm).

Balsa vs. Paper/Wood bulkheads for BT-20 tubes. Masking tape is used for a snug fit.

- Post a Comment -

You must be logged into RocketReviews.com to post a comment.

EXIF Data

Attribute	Value
Time	December 17, 2011 - 06:49:35
Camera	OLYMPUS IMAGING CORP. u1010,S1010
F-Number	f/4.3
Exposure	1/80 sec
ISO	800
Exposure program	Normal Program

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-180703163339.html">Photo Album - Photos for the Tip 'Adding Altimeter Payload for Low Power Rockets' - Balsa vs. Paper/Wood bulkheads for BT-20 tubes. Masking tape is used for a snug fit.</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-180703163339.html]Photo Album - Photos for the Tip 'Adding Altimeter Payload for Low Power Rockets' - Balsa vs. Paper/Wood bulkheads for BT-20 tubes. Masking tape is used for a snug fit.[/url]

Image Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-180703163339.html"><img src="https://www.rocketreviews.com/image-balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-600-800-122011200321400.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=https://www.rocketreviews.com/balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-180703163339.html]
  [img]https://www.rocketreviews.com/image-balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-600-800-122011200321400.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-180703163339.html"><img src="https://www.rocketreviews.com/image-balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-120-200-122111104925611.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=https://www.rocketreviews.com/balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-180703163339.html]
  [img]https://www.rocketreviews.com/image-balsa-vs-paperwood-bulkheads-for-bt-20-tubes-masking-tape-is-used-for-a-snug-fit-120-200-122111104925611.jpg[/img]
 [/url]
[/center]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.