Rocketry Videos
Rocketry Product: Madcow Rocketry - 2.6" DX3 {Kit} (K-126) [?-]
UCSD MAE 155B - Supersonic Rocket Launch (2011-06-07)June 4, 2011 - Plaster City, CA UCSD MAE 155B - Aerospace Design II Madcow Super DX3 rocket AKA "LAWNDART" LAWNDART = Longitudinal Acceleration With Nosecone Deployment And Rapid Take-off Aerotech ... [View]
Super DX3 CTI Over-pressure CATO (2013-08-11)Launch of a Madcow Super DX3 on August 10, 2013 at the Tri-Cities Rocketeers club launch (Pasco, WA), Cesaroni motor. Motor burns normally, then extinguishes, then over-pressures blowing out the ... [View]
Barky The Wonder Cat and Friends! (2012-08-19)good ol' fashioned 1080p on a 720p source video first flight is Bryan Hackett's Aerotech Initiator, and the second two are Peter Hackett's Madcow Rocketry DX3 god is an astronaut - loss (cut up to ... [View]
Blue Angels DX3 Rocket - AeroTech 38/1320 J510W - 6,507' AGL (2019-07-02)6-30-19 Tripoli Colorado launch at Hartsel, CO 540 mph 15,273' MSL [View]
Blue Angels DX3 Rocket - AeroTech J825R to 5,045' AGL (2019-05-27)Hartsel, CO Tripoli Colorado, Spring Fling 2019 8.6lbs on the pad MissileWorks RRC3 and T3 [View]
Blue Angels DX3 Rocket on AeroTech J570W to 5,096' AGL (2018-04-24)8.75 lbs of rocket, 28 Gs of acceleration AeroTech 38/1080 RMS J570W Class 2 Iowa farm flight under FAA CoA / NOTAM All credit to Aaron Tippin! [View]
Blue Angels DX3 Rocket, AeroTech J575FJ to 3,934' AGL (2019-05-06)3,934' AGL 397 mph 22Gs of acceleration Northern Colorado Rocketry Club Pawnee National Grasslands [View]
Enter Sandman Rocket Launch (2020-05-06)Rocket is named Enter Sandman. MadCow DX3 rocket kit. Modified for dual deploy with Apogee Rockets 4" electronics bay in the middle running custom telemetry and flight recording. This was flight ... [View]
Mad Cow Super dx3 launch at FAR (2017-11-03)Frank Pitoniak successful launch and recovery of a 4" Mad Cow Super dx3 rocket on a Cesaroni 38mm motor at the FAR facility October 7, 2017. [View]
Madcow DX3 (2.6") First Flight - Onboard and External Cameras (2019-04-14)My friend Emmett Hart and I are building a datalogging rocket for our engineering final project. We built a DX3 to test our building skills. It flew great. The timestamp on the video is wrong. [View]
Madcow DX3 at SPAAR FIG Launch 07.06.2019 (2019-07-08)Motor startup was a lot like my old Studebaker. :) Flight was a Madcow Rocketry DX3 dual deploy. Perfectflight Stratologger CF, streamer drogue with 24" main chute. Power was an Aerotech G79W LMS. ... [View]
Madcow DX3 at SPAAR FIG Launch 07.06.2019 (2019-11-23)Motor startup was a lot like my old Studebaker. :) Flight was a Madcow Rocketry DX3 dual deploy. Perfectflight Stratologger CF, streamer drogue with 24" main chute. Power was an Aerotech G79W LMS. ... [View]
Sponsored Ads
 |
 |