18mm 3 motor cluster rocket where the motor mount tubes form the lower half of the rocket and fit into the BT60 upper payload sectIon. Fin can assembly has 6 fins mounted on a BT60 ring which slides over the end of the three motor tubes. Stickers instead of decals. Nice looking rocket. Upgraded the recovery system with a Kevlar shock cord.
Flight Date: | 2019-12-07 |
Rocket Name: | Custom Rockets Landviper |
Kit Name: | Custom Rockets - Landviper {Kit} (10001) |
Flyer's Name: | Matthew Bond |
Motors: | 3xC6-5 |
Wind Speed: | 4.00 mph |
Launch Site: | SEARS |
Awesome Flight! All three motors lit on the pad, nice fast, straight high boost, still climbing at ejection. Good chute, medium walk, sod landing, no damage. Motor tubes starting to show some stress from friction fitting and removing motors.
Stage | Motor(s) |
---|---|
1 | 3 x Estes C6-5 |
Sponsored Ads
![]() |
![]() |