J.A.P. Systems - Styro-F.O. Jr. Flying Saucer

J.A.P. Systems - Styro-F.O. Jr. Flying Saucer Kit

Mort Binstock reviewed the Styro-F.O. Jr. kit in the July/August 2001 issue of Sport Rocketry magazine:

"All parts were packaged neatly inside a labeled plastic bag."
"The flying saucer body appears to be made from Styrofoam dishes. Window openings and top/bottom cutouts are cut cleanly and accurately."
"The instructions are simple, clear, and step by step. A fin guide template... is also provided and assures accurate fin alignment."
"Recommended engines are C6-3 and C6-5"
"I flew my Styro-F.O. Jr. using an on-hand C6-0 engine. An ejection charge is not required nor actually utilized by this model. Boost was fast and straight followed by a slow floating descent!"

J.A.P. Systems Styro-F.O. Jr. Flying Saucer By Mort Binstock (November 13, 2010)
The following excerpt is from "Sport Rocketry". The intention is to allow guests to get a basic feeling about a kit. We strongly suggest that you get a copy of the referenced Sport Rocketry and read the entire article. Inside you will find many helpful hints in construction as well as other useful information. For more information, use the two links above. (Sport Rocketry - July/August ...