Thark F-52 - Rocksim Design File

Designs >> Rocksim Library >>

Thark F-52 Rocksim Design File

Comments: Some ballast was needed to allow the parger motors to be used. To keep the amount of ballast down to the minimum, a hole must be drilled to a depth of 5.5" from the back face of the shoulder. A total of 5/8 oz, or 5 - 1/8 oz fishing sinkers, must be epoxied at the forward end of this hole.

Designer: Buzz Nau (Original Design) C. P. McGraw -- BARCLONE Rocketry (RockSim)

Visit Ye Olde Rocket Forum to download F-52_Thark.rkt

To use the design file above, you need a copy of Rocksim, a rocket design and simulation program.

Parts Breakdown

F-52_Thark.rkt Ogive Nose Cone

Semroc SE-12 Screw Eye-Large Mass Object

Semroc Mass Object

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 18.00 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 5.50 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 5.00 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 5.00 in]

Semroc LL-330 Launch Lug

Apogee Components Polyethylene LDPE Parachute (24.00 in)

F-52_Thark.rkt Freeform Fin Set Freeform Fin Set

F-52_Thark.rkt Freeform Fin Set Freeform Fin Set

F-52_Thark.rkt Freeform Fin Set Freeform Fin Set

F-52_Thark.rkt Freeform Fin Set Freeform Fin Set

F-52_Thark.rkt Freeform Fin Set Freeform Fin Set

F-52_Thark.rkt Freeform Fin Set Freeform Fin Set

SubAssembly

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 5.00 in]

BalsaMachining.com EB24-P Ring

Semroc EH-38 Engine Hook E Mass Object

Semroc Ring

Semroc Ring

Semroc Conical Transition

What You Can Do

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-180808163722.html">Thark F-52 - Rocksim Design File</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/rocksim-180808163722.html]Thark F-52 - Rocksim Design File[/url]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.