Measurement Correction: in the video at 17:10 Tim says that the engine mount tube should be recessed to 2-5/8". The correct measurement is 3-13/32". This is the video instructions for the assembly of the Apogee Components 1/70th scale Saturn V model rocket. This is the first DVD. It covers: Step #1 - Engine Mount Tools and Parts 00:00:00 Step #2 - Eng Mount Assembly Part 1 00:02:24 Step #3 - Eng Mount Assembly Part 2 00:06:10 Step #4 - Eng Mount Assy Part 3 00:10:52 Step #5 - Making Thrust Rings 00:12:56 Step #6 - Eng Mount Assy Part 4 00:16:46 Step #7 - Big Couplers 00:19:26 Step #8 - Cutting Out Wraps 00:22:28 Step #9 - Trimming to Length 00:25:16 Step #10 - Identifying the vacuum-form wraps & their positions (see attached file). 00:29:04 Step #11 - Wrap Orientation Part 1 00:29:14 Step #12 - Wrap Orientation Part 2 00:36:00 Step #13 - CYA applicator 00:40:24 Step #14 - Attaching Wraps 00:44:40 Step #14A - Alternate Glue Method 00:52:53 Step #15 - Nozzle Assembly 1 00:57:10 Step #16 - Nozzle Assembly 2 01:04:15 Step #17 - Painting the Base 01:06:28 Step #18 - Booster Tunnels 1 01:11:34 Step #19 - Booster Tunnels 2 01:17:05 Step #20 - Booster Tunnels 3 01:18:09 Step #21 - Booster Tunnels 4 01:19:46 Step #22 - Booster Tunnels 5 01:24:03 Step #23 - Launch Lug Installation 01:26:15 Step #24 - Fairing Braces 01:30:28 Step #25 - Fin Fairings 01:35:01 Step #26 - Slots In Fairings 01:37:27 Step #27 - Fairing Installation 01:40:24 Step #28 - Blending Fairings 01:45:07 Step #29 - Display Nozzle Install 01:47:37 Step #30 - Big Transition 1 01:49:03 Step #31 - Big Transition 2 01:54:19 Step #32 - Big Transition 3 01:55:53 Step #33 - Big Transition 4 02:02:28 Saturn V Disk 2 - https://youtu.be/F4udqp3ewxs Saturn V Disk 3 - https://youtu.be/bNhyG8hWPxQ