This is the video instructions for the Apogee Components 1/70th scale Saturn V model rocket. This is the third DVD. It covers: Step #49 - Removing Plastic Parts 00:00:00 Step #50 - Plastic Assy Part 2 00:06:17 Step #51 - Plastic Assy Part 3 00:14:43 Step #52 - RCS Installation 00:16:05 Step #53 - Pre-paint Touch-up 00:17:36 Step #54 - Ullage Motor Repair 00:20:52 Step #55 - Fix Any Gaps 00:23:39 Step #56 - Primer Painting 00:26:08 Step #57 - Painting Part 1 00:30:05 Step #58 - Painting Part 2 00:31:16 Step #59 - Painting Part 3 00:34:14 Step #60 - Painting Part 4 00:40:42 Step #61 - Fin Voids 00:42:54 Note: After the fins have been repaired, they can be painted and installed into the fin slots on the rocket (not shown). If the fit is tight, you do not need to glue them in place. They can then be removed whenever you transport the rocket to and from the rocket launch range. Step #62 - Decal Placement 00:44:24 Step #63 - Motor Installation 00:45:39 Step #64 - Flight Prep 1 00:47:48 Step #65 - Flight Prep 2 00:51:34 Step #66 - Out to Launch DVD Part 1 is at: https://youtu.be/SYo6m9dGdEI DVD Part 2 is at: https://youtu.be/F4udqp3ewxs