Decals: | Printed Wrap/Pre-Printed |
Diameter: | 1.35 inches |
Fin Material: | Plastic |
Length: | 18.00 inches |
Manufacturer: | Estes |
Model: | 001824, 1824 |
Motor Size: | 18 millimeters |
Nose Cone Material: | Plastic |
Original Price: | $26.99 |
Power: | High-Power |
Product Type: | Launch/Starter Set |
Recommended Motors: | A8-3, B4-4, B6-4, C6-5 |
Recovery: | Parachute |
Status: | In-Production |
Style: | RTF, Sport |
Weight: | 2.70 ounces |
An RTF kit that, with its red BT and silver fins/nose cone, is, IMO, one of the nicest looking rockets out of the box that you can buy. Components This kit has a plastic all-in-one fin can that can take a free fall a lot better than balsa fins tend to. /h2 Construction is very easy. Simply tie the parachute and nose cone, to the pre-attached rubber cord. ...
Brief: Let me start by saying, DON'T TRUST THIS ROCKET!! But a good starter, don't use a C6-5 though. Construction: The rocket has one tube, no payload. 4 plastic molded one piece fins alredy attached, this is a basic ESTES starter. The design is similar to the ESTES TIDAL WAVE STARTER SET. Works good on B6-4. This is an extremly quick build because CODE RED only needs the ...
This is a well constructed ready to fly rocket that looks good in the air! 1 - Body Tube 4 - Fins 12in. Parachute Plastic Nose Cone Pro's - Extremely Durable Overall. This rocket came ready to fly. It has a very durable fin assembly. Reflective Body Tube is easy to spot in flight. Quick Descent Con's - Nose cone sits too freely in the body tube. Construction Rating: 5 ...
A ready to fly kit with a basic rocket that looks cool! A great rocket for beginners. The kit is a starter set and comes with a Code Red rocket (already assembled except for the parachute) and a launcher & ignitor controller. Pros: No construction, except for attaching the parachute! Cons: nose fits on loosely, had to use tape to make tighter. Construction Rating: 5 out of 5 ...
A ready to fly rocket single stage rocket which can take a real beating if it has to. Code Red has a cardboard airframe with molded motor mount which uses a locking ring to secure the motor. Also molded onto the motor mount are four plastic fins. This was a ready to fly rocket so no construction was required except attaching the parachute which was pretty simple. Many have said the nose ...
Sponsored Ads