Manufacturer:	Aero Pack
Product Type:	Component

Reviews

• Aero Pack Motor Retainer By Jack Caynon

  Brief: RMS Motor Retainer Discussion: The 29mm motor retainer can now handle Aerotech's 29/40-120 motors, too. The retainer comes in 2 pieces packaged inside a plastic bag with simple instructions. One threaded retainer "ring" fits over the motor tube like a collar. Then a threaded cap that screws on the end of the ring. As with typical RMS stuff, the RMS aft closure still sits on the motor ...

• Aero Pack Motor Retainer By Darrell Mobley

  This review is provided courtesy of: Aero Pack's Machined Aluminum Motor Retainers ATLANTA, Georgia (ROL) -- Ever so often, a new product comes out that really creates some excitement. This product release from Aero Pack (email: aeropack@earthlink.net ) is one of those. The idea is so simple that it screams KISS and yet is just complicated enough that the average rocketeer couldn't ...

• Aero Pack Motor Retainer By Phillip Gerringer

  The system is basically 2 pieces. One threaded retainer "ring" that fits over the motor tube like a collar. Then a threaded cap that screws on the ring. As with typical RMS stuff, the RMS aft closure still sits on the motor tube. Then the retainer ring surrounds both the tube and the aft closure. The retainer ring is epoxied with high heat JB Weld epoxy. Then the cap actually screws on to the ...