FlisKits 29mm Upscale Deuce's Wild! Upscale
Scratch - 29mm Upscale Deuce's Wild! {Scratch}
Contributed by Mike Reese
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild.
Brief:
I made this upscale Deuce's Wild! sometime ago. It uses two 29mm 180 cases. I have flown it on all of the AeroTech reloads for that case except the G-75J. Amazingly, it flew once on a single H165 accidentally and was stable but the delay was way late. It sustained minor damage and has since been repaired.
In a follow up email, Mike added:
My friend Todd Graves purchased a Deuce's Wild! kit from you last spring I think. I thought it would be cool to upscale it. I took your motor mount centering rings and scanned them on my computer and scaled them up to fit in a LOC 3" tube. I cut them out of plywood with a hole saw. The nose cone is a standard LOC 3" nose cone. The fins I cut from G-10 fiberglass. I built the rocket in RockSim with straight motor tubes instead of canted and balanced the rocket from that. Unfortunately, we lost the stock Deuce at an Iowa launch as I'd put 2 D13-10 reloads in it and a slightly bigger than stock chute. We had a problem with it breaking a fin loose with the stock chute.
--Mike
#Related Reviews
- Deuce's Wild to Deuce-XL5 By Dick Stafford
After seeing various Deuce bashes on The Rocketry Forum and elsewhere: eugenefl's fighter, sandman's DynoSoar, a super-roc version, and most recently an egg-loft version flown at NARAM, I decided to build a Deuce-XL5 to go with my 29mm and MMX Fireball XL5s. My design constraints included keeping ...
- FlisKits U.S.S. Deuce's Wild By Justin Cartisano
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild. Here's my entry, ...
- Modification Deuce-4 Heavy Payloader By Mark Schrader
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild. Attached is my Deuce Bash ...
- Scratch Deuce Jr. By Matthew McFarland
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. EMRR hopes that these kitbashes inspire our guests to get creative and share your kitbashes, on FlisKits rockets or any other manufacturers, with EMRR. I logged ...
- Scratch Deuce's Wild Payloader By Allan Lovering
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild. Parts list: 1 ...
- Scratch Dos Kraken By Andrew Hansom
Dos Kraken is a combination and upscale of two unique rockets. The design is from Pemtech's Kraken with the sculpted tube fins and the canted twin motor tubes design was borrowed from FlisKit's Deuce's Wild. Dos Kraken will fly on a pair of 38mm x 480 AT motors with the total output of a J sized ...
- Upscale FlisKits Deuce's Wild (24mm) By Lance Alligood
This is a 24mm upscale of the (justifiably) insanely popular FlisKits Deuce's Wild! All of the key parts used in this build (the motor mount, body tube, and nose cone) were ordered directly from FlisKits as well. It is built to use all sizes of available and popular 24mm motors. I ...
Related Products
Sponsored Ads
 |
 |